Product Manual
Oximeter SerieSOximeter SerieS
PULSE OXIMETER INSTRUCTION MANUAL
23
After nishing the time and the ID number setting, plug your
nger into the sensor as indicated in the picture below:
Select the suitable sensor in terms of
type and dimension.
Clip the sensor in the right position of
the patient nger and ensure that the
patient’s nail surface is facing upward.
Plug sensor into SpO2 port on top panel
of Pulse Oximeter.
Note: To maintain the highest degree of accuracy, it is
recommended that the nger and the Oximeter sensor/
probe is kept as still as possible.
Description of Fig. 7:
SpO2: SpO2 value (displayed value is 98% )
PR: Pulse rate (displayed value is 67 bpm)
5.1 Factors That May Aect The Measurement
During operation, the accuracy of oximetry readings can be
aected by the following factors:
Fig. 7
Fig. 6 placement of the sensor