Product Manual

Oximeter SerieSOximeter SerieS

PULSE OXIMETER INSTRUCTION MANUAL

4.2 ID Number Setting

1. After powering on, hit the menu button two times. You

can enter into the ID setting screen.

Press the up or down button to set the ID number and

then press the menu button to conrm your setting.

It will turn to the normal screen if there is no button

pressed for 10 seconds. The setting range of ID number

is: 1-99.

2. In normal screen, press the up button, the digital LED

shows the current ID number. It will automatically turn

back to normal screen.

5 Take A Measurement

SpO2 measuring is a non-invasive technique used to

measure the amount of oxygenated hemoglobin and pulse

rate by measuring the absorption of selected wavelengths

of light. The light emitted by the red infrared light-emitting

diodes passes through the tissue and is converted into

electrical signals by a photodiode.

Fig. 4

Fig. 5