Product Manual

Oximeter SerieSOximeter SerieS
PULSE OXIMETER INSTRUCTION MANUAL
19
Warning: Make sure that the operating environment of the
equipment meets the specic requirements. The equipment
may not meet the specications dened in this manual and
unexpected consequences, e.g. may result in damage to the
equipment
3.3 Connect The Sensor
1. Before use, check the Pulse Oximeter for mechanical damage.
2. Install the alkaline batteries and ensure that the
batteries have sucient power.
3. Plug the SpO
2 extension cable in the multifunctioning
connector on top of the Oximeter, as shown in Fig. 3
Ensure that the sensor is rmly plugged in.
Note: The connector is also applied to upload data to Med-
View software for reviewing. Detailed information is referred
to MedView software operator’s manual.
Fig. 3