Product Manual
Oximeter SerieSOximeter SerieS
PULSE OXIMETER INSTRUCTION MANUAL
16
Battery Installation (Batteries Not Included):
1) Open the battery cover: Rotate the xing screw slightly
in the rear panel to the up position which is marked
with “
“ and then open the cover.
2) Install 2 batteries as indicated by the polarity sign.
Note: Be sure to insert the batteries in the correct
polarity, as indicated by polarity markings (+ and -)
inside the battery cover.
3) Close battery cover: Close the battery cover and rotate
the screw to the
position, and the batteries are
locked.
Make sure that the polarity of the batteries is
correct, otherwise the unit cannot operate normally.
Battery Life And Replacement
When the low-power indication lamp is lighted, please
replace the batteries with new ones as needed.
t
Always turn the unit o before replacing the batteries.
t
Dispose of the used batteries according to the applicable
local regulations.
Warnings!
If battery contents should get into your eyes, immediately
rinse with plenty of clean water. Consult a doctor immediately.
Cautions!
t
Do not use batteries not specied for this unit.