User's Manual

3.3 Menu Introduction:

A. Press Menu button to access the Menu:

Use “Up/Down” buttons to navigate then press Menu button to access the selected item.

-The menu including：USB connect, Slide Show, Clock, Auto off, Backlight, Contrast,

Delete, Power off and Exit.

Note: Hold Menu button for 2 seconds. The unit will power off. It is not acceptable power off

in the main menu interface.

B. USB connect:

-Connect the unit with computer. Select “USB connect” and press Menu button to enter the

sub-menu.

-Select “Yes” to connect it with computer, please refer to section “4. Picture File

Conversion” .

-Select “No” to exit.

C. Slide Show:

-Select “Slide Show” and press Menu button to enter.

- Select “on”, adjust the setting by using “Up/Down” buttons (the slide time range is

00-15). Press Menu button to exit the setting and back to “Menu” after adjusting.

- Select “off”, no slide function, press Menu button to exit the setting and back to “Menu”.

- Select “Cancel”, press Menu button to exit the setting and back to “Menu”.

D. Power Off(for LCD):

-Select “Power off” and press Menu button to shut LCD display.

-Press Menu button again several seconds, the screen will display just as before.

E. Auto off(for LCD):

-Select “Auto off ”and press Menu button to enter.

Main Menu

USB Connect

Slide Show

Auto off

Backlight

Contrast

Delete

Power Off

Exit