User's Manual

-The menu including：USB connect, Slide Show, Clock, Auto off, Backlight, Contrast,
Delete, Power off and Exit.
Note: Hold Menu button for 2 seconds. The unit will power off. It is not acceptable power off
in the main menu interface.
B. USB connect:
-Connect the unit with computer. Select “USB connect” and press Menu button to enter the
sub-menu.
-Select “Yes” to connect it with computer, please refer to section “4. Picture File
Conversion” .
-Select “No” to exit.
C. Slide Show:
-Select “Slide Show” and press Menu button to enter.
- Select “on”, adjust the setting by using “Up/Down” buttons (the slide time range is
00-15). Press Menu button to exit the setting and back to “Menu” after adjusting.
- Select “off”, no slide function, press Menu button to exit the setting and back to “Menu”.
- Select “Cancel”, press Menu button to exit the setting and back to “Menu”.
D. Power Off(for LCD):
-Select “Power off” and press Menu button to shut LCD display.
-Press Menu button again several seconds, the screen will display just as before.
E. Auto off(for LCD):
-Select “Auto off ”and press Menu button to enter.
-Press “On”, then press “up” button or “down” button to adjust time for Auto off, (the time
arrange is 00-30 minutes), show as blow.
- Select “off”, press Menu button to exit the setting and back to “Menu”.
- Select “Cancel”, press Menu button to exit the setting and back to “Menu”.
F. Backlight Adjusting:
-Select “Backlight” and press Menu button to enter.
Main Menu
USB Connect
Slide Show
Auto off
Backlight
Contrast
Delete
Power Off
Exit