User Manual

15
The application settings can be accessed via the side menu (Figure 13).
On this screen, the following settings can be changed:
4 Settings
Wipe application data: erases all
data from the app and removes all per-
missions.
Enable query mode: Changes the
DynaLogger memory cleaning function.
By default, whenever data is collected
from the DynaLogger, it is reset for stor-
age of new data collection. By enabling
query mode, whenever a collection is per-
formed the user will be asked to decide
whether or not to clear the DynaLogger’s
memory.
Default axis nomenclature:
defines the default orientation of the X, Y
and Z axes of the DynaLogger.
Synchronization warning: Enables
the notification bar for pending synchroni-
zation (red);
Pending warning: Enables the noti-
fication bar for spots with pending status;
Scan spots: Enables automatic
searching for associated spots when open-
ing a machine.
Figure 13 - Settings
Figure 14 - Warnings
DynaPredict Application Descriptive Manual - Version 3.0 (16/04/2021)
RMP - Publication controlled by SGI