User Manual

Figure 10 - Instant reading

The ﬁrst screen the user will have access to is the “Instant read-

ing” (Figure 10) where temperature and vibration values are shown in the 3

axes in real time. The default ﬁll of these graphs is blue. However, for parame-

ters with thresholds deﬁned in the spot conﬁgurations, the color of the graph

will change if the limits are exceeded. If no limit is exceeded, the graph color

is green. If the A1 limit is exceeded, the graph color will change to yellow. If the

A2 limit is exceeded, the color will change to red.

There is also information about the battery life, alert level and

available memory on the device. Additional information can also be accessed

from the associated DynaLogger, such as serial number, sample interval, and

more.

In addition, the spot collection settings can also be edited from

this screen as well as requesting spectral analysis through the ‘Spectral’ tab,

which will be explained in the next section.

Edit Spot and

Refresh data

More information

Tabs

Battery Alert Memory Available

Machine : CMT10230

Mancal LOA

DynaPredict Application Descriptive Manual - Version 3.0 (16/04/2021)

RMP - Publication controlled by SGI