Quick Start Guide

Screw ISO 7980 M6x1
Spring Washer
Figure 4 - Screwed Dynalogger
In terms of attachment, the device can be:
• Epoxy glued: ideal for machines whose housing cannot be
drilled;
• Screwed: Dynaloggers have a hole precisely for this type of
attachment as shown in Figure 4. Each device goes with a screw
and a spring washer.
Note that different locations generate different
measurements. So in order to obtain a reliable data history, it is
recommended to keep Dynaloggers always installed in the same
location.
08
Manual de Uso Seguro para a solução Dynapredict (Ex.) - versão 1.1 (19 02 2019)
RMP - Publicação controlado por SGQ