User manual

Dynamix UM-SB Series User Manual V0.06
75
Legal address pool will setup the legal IP addresses from which authorized person can configure
the router. This is the more secure function for network administrator to setup the legal address of
configuration.
This is the default supervisor ID and password is “root”. It is highly recommended that you change
these for security purpose.
Supervisor ID: Type the new ID
Supervisor Password: Type the existing password (“root” is the default password when shipped)
Password Confirm: Retype your new password for confirmation.
Telnet Port: For Telnet, you may change the default service port by typing the new port number. If
you change the default port number then you will have to let user who wish to use the service
know the new port number. The default value is 23.
On trust host list, configured 0.0.0.0 will allow all hosts on Internet or LAN to access the router.
Leaving blank of trust host list will cause blocking all PC from WAN to access the router. On the
other hand, only PC in LAN can access the router.
If you type the excact IP address in the filed, only the host on this listing can access to the router.
Click Finish to finish the setting.