User manual

Dynamix UM-SB Series User Manual V0.06

IP: 192.168.0.1

Subnet Mask: 255.255.255.0

Gateway: 192.168.0.254 (The Gateway IP is provided by ISP.)

Host Name: SOHO

Some of the ISP requires the Host Name as identification. You may check with ISP to see if your

Internet service has been configured with a host name. In most cases, this field can be ignored.

WAN1:

VPI: 0

VCI: 32

Encap: Click LLC and than Click Next to review

Review

The screen will prompt the new configured parameters. When using on bridge mode, the protocol

mode must be automatic set to Ethernet over ATM (EoA).Checking the parameters and Click

Restart .The router will reboot with the new setting or Continue to configure another parameters.