User manual

Dynamix UM-SB Series User Manual V0.06

The flow chart of bridge mode setup:

Setup up system mode and SHDSL mode

Click Bridge and CPE Side to setup Bridging mode and then click Next for the next setting.

This router can be setup as one of two SHDSL.bis working mode: CO (Central Office) and CPE

(Customer Premises Equipment).

The CO-CPE Side only for Multi-link mode of 4-wires model. Channel A is used as CO side and

channel B is used as CPE side.

For connection with DSLAM, the SHDSL.bis router’s working mode is CPE. For “LAN to LAN”

connection, one side must be CO and the other side must be CPE.

Set up (a) LAN IP address , Subnet Mask, Gateway and Host Name

(b) WAN1 VPI,VCI and Encapsulation

LAN: