User manual

Dynamix UM-SB Series User Manual V0.06
133
You can create up to 10 virtual server mapping entry via modify command.
----------------------------------------------------------------------
Command: setup ip_share pat modify <1~10> <more...>
Message: Please input the following information.
Virtual server entry number <1~10>: 1
----------------------------------------------------------------------
After key in enter, the screen will prompt as below.
>>
interface
Active interface
port
TCP/UDP port number
server
Host IP address and port number
protocol
Transport protocol
name
Service name
begin
The schedule of beginning time
end
The schedule of ending time
Set the active interface number via interface command.
You can configure the global port number by using port command.
The local server, host, IP address and port number are configured via server command.
The authorized access protocol is setup via protocol command.
Name command can be used to configure the service name of the host server.
Begin and end command is used to setup the local server schedule to access.
Virtual Server:
Virtual Server entry number(1~10)
Interface(1~8)
ICP/UDP Port Number(1~65534)
Host IP Address
Host Port Number
Protocol
□TCP □UDP
Service Name
Beginning Time
Ending Time
You can view the fixed NAT mapping entry via list command.
5
5
.
.
1
1
2
2
.
.
9
9
.
.
3
3
D
D
M
M
Z
Z
DMZ (demilitarized zone) is a computer host or small network inserted as a “neutral zone”
between a company private network and the outside public network. It prevents outside users from