User manual

Dynamix UM-SB Series User Manual V0.06
130
----------------------------------------------------------------------
Command: setup ip_share nat virtual range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT local address range entry number <1~5>: 1
Base address: 192.168.0.2
Number of address: 49
----------------------------------------------------------------------
NAT (Virtual IP address and range)
Base Address
Number of Address
1
2
3
4
5
You can delete virtual IP address range- from 1 to 5- by using delete command.
You can view the virtual IP address range via list command.
Global IP address pool
To setup global IP address pool, move the cursor “>>” to global command and press enter.
>>
range
Edit global IP address pool
interface
Bind address pool to specific interface
delete
Delete global IP address pool
list
Show global IP address pool
You can create five global IP address pool range via range command.
----------------------------------------------------------------------
Command: setup ip_share nat global range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT global IP address range entry number <1~5>: 1
Base address: 122.22.22.2
Number of address: 3
----------------------------------------------------------------------
After configuration global IP address range, you can bind address pool to specific interface via
interface command.
NAT (Global IP Address and range):
Base Address
Number of Address
Active Interface Numbe(1~8)
1
2
3
4
5