User manual
Dynamix UM-SB Series User Manual V0.06
123
5
5
.
.
1
1
2
2
.
.
5
5
V
V
L
L
A
A
N
N
Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so
that they can communicate as if they were attached to the same wire, when in fact they are located
on a number of different LAN segments. Because VLAN is based on logical instead of physical
connections, it is extremely flexible.
You can setup the Virtual LAN (VLAN) parameters in vlan command. The router support the
implementation of VLAN-to-PVC only for bridge mode operation, i.e., the VLAN spreads over both
the COE and CPE sides. The unit supports up to 8 active VLANs with shared VLAN learning (SVL)
bridge out of 4096 possible VLANs specified in IEEE 802.1Q.
Move the cursor “ >> “ to vlan and press enter.
>>
mode
Trigger virtual LAN function
modify
Modify virtual LAN rule
pvid
Modify port default VID
link_mode
Modify port link type
List
Show VLAN configuration
To active the VLAN function, move the cursor “ >> “ to mode and press enter. The products
support two types of VLAN: 802.11q and Port-Based.
----------------------------------------------------------------------
Command: setup vlan active <Disable|8021Q|Port>
Message: Please input the following information.
Tigger VLAN function (Tab select) <Disable>: 8021Q
----------------------------------------------------------------------
VLAN Mode:
VLAN Mode
□
Disable
□
802.1Q Tag VLAN
□
Port Based VLAN
The IEEE 802.1Q defines the operation of VLAN bridges that permit the definition, operation, and
administration of VLAN topologies within a bridged LAN infrastructure. Port-Based VLANs are
VLANs where the packet forwarding decision is based on the associated ports. If you don’t use
VLAN ,set to Disbale.
5
5
.
.
1
1
2
2
.
.
5
5
.
.
1
1
8
8
0
0
2
2
.
.
1
1
1
1
Q
Q
V
V
L
L
A
A
N
N
To modify the VLAN rule, move the cursor “ >> “ to modify and press enter.
----------------------------------------------------------------------
Command: setup vlan modify <1~8> <1~4094> <string>
Message: Please input the following information.
Rule entry index <1~8>: 1
VLAN ID (ENTER for default) <1>: 10
VLAN port status (ENTER for default)<111111111>:111111111