User manual

Dynamix UM-SB Series User Manual V0.06
109
Telnet TCP Port:
Telnet TCP Port
Legal client IP Address pool:
Legal client IP Address pool
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Move the cursor to port and press enter. You can setup port number form 1 to 65534.
Move the cursor to IP Pool and press enter, there are sixteen legal IP address for telnet access.
The default legal address is 0.0.0.0. It means that there is no restriction of IP to access the router
via telnet. There have two sub-menu: modify and clear for easy to set up each one.
Move the cursor to list and press enter, you can view full listing on security profile including the
Telnet listing TCP port and 16 host IP address.
5
5
.
.
9
9
.
.
3
3
S
S
N
N
M
M
P
P
Simple Network Management Protocol (SNMP) is the protocol not only governing network
management, but also the monitoring of network devices and their functions.
The router can generate SNMP traps to indicate alarm conditions, and it relies on SNMP
community strings to implement SNMP security. This router support MIB I & II.
Move the cursor “ >> “ to snmp and press enter.
>>
community
Configure community parameter
trap
Configure trap host parameter