User manual

Dynamix UM-SB Series User Manual V0.06
99
5
5
.
.
3
3
E
E
n
n
a
a
b
b
l
l
e
e
To setup the router, move the cursor “ >>” to enable and press enter key. While the screen
appears, type the supervisor password. The default supervisor password is root. The password
will be prompted as “ * “ symbol for system security.
----------------------------------------------------------------------
Command: enable <CR>
Message: Please input the following information.
Supervisor password: ****
----------------------------------------------------------------------
In this sub menu, you can setup management features and upgrade software, backup the system
configuration and restore the system configuration via utility tools.
For any changes of configuration, you have to write the new configuration to NVRAM and reboot
the router to work with new setting.
The screen will prompt as follow:
>>
enable
Modify command privilege
setup
Configure system
status
Show running system status
show
View system configuration
write
Update flash configuration
reboot
Reset and boot system
ping
Packet internet groper command
admin
Setup management features
utility
TFTP upgrade utility
exit
Quit system
Command Description:
Command
Description
enable
Modify command privilege. When you login via serial console or Telnet, the
router defaults to a program execution (read-only) privileges to you. To
change the configuration and write changes to nonvolatile RAM (NVRAM),
you must work in enable mode.
setup
To configure the router, you have to use the setup command.
status
View the status of router.
show
Show the system and configuration of router.
write
Update flash configuration. After you have completed all necessary setting,
make sure to write the new configuration to NVRAM by “write” command and
reboot the system, or all of your changes will not take effect.
reboot
Reset and boot system. After you have completed all necessary setting,
make sure to write the new configuration to NVRAM and reboot the system,
otherwise, all of your changes will not take effect.
ping
Internet ping command.
admin
You can setup management features in this command.