User manual

DynamixUM‐SNBUserManualVer1.0093
To set the SHDSL Margin, move the cursor to margin and press [ENTER]. Select the margin via [TAB] key and key in the Next
margin.
Setup SHDSL parameter, SNR Margin
SNR margin is an index of line connection. You can see the actual SNR margin in STATUS SHDSL. The larger SNR margin,
the better line connection. For example, if you set SNR margin in the field as 3, the SHDSL connection will drop down and
reconnect when the SNR margin is lower than 3. The setting range is -10 to 21.
Setup SHDSL parameter, Pair Mode
When using 4-wires (2-pair) model, it will show Pair Mode item on here. User can select 1 Pair or 2 Pair for the DSL connection.