User manual

DynamixUM‐SNBUserManualVer1.0090
If the SHDSL.bis NTU is the multi-interfaces model, it will display more types of interfaces that can be selected.
Model
Interface modes
support
UM-SNB/E1 , UM-SNB/E1/4w
E1 interface model
E1
E1
UM-SNB/703 ,
UM-SNB/703/4w
E1 + T1 interface model
T1
UM-SNB/35 , UM-SNB/35/4w
Serial interface model
Serial
UM-SNB/L , UM-SNB/L/4w
Ethernet interface model
Ethernet
E1
Serial
Ethernet
E1+Serial
UM-SNB/3in1 ,
UM-SNB/3in1/4w
E1+Serial+Ethernet
interface model
E1+Ethernet
E1
T1
Serial
Ethernet
E1+Serial
E1+Ethernet
T1 + Serial
UM-SNB/4in1 ,
UM-SNB/4in1/4w
E1+T1+ Serial +Ethernet
interface model
T1 + Ethernet
5.4.2. Configure SHDSL parameters
This section shows how to setup the SHDSL parameters: SHDSL Mode, Annex type, Psd Mask, SNR margin.
Select Shdsl, and press [ENTER] or [RIGHT].
Setup SHDSL Parameter, Mode