User manual

DynamixUM‐SNBUserManualVer1.0084
5. Configuration with Console Port
This chapter will deal with the details of configuration and operation of this product via console port with terminal emulation
program. The configuration of the UM-SNB NTU is performed via a menu-driven embedded software, using a standard ASCII
terminal or a PC running a terminal emulation application connected to the rear panel CONSOLE port.
Windows includes a terminal emulation program called HyperTerminal. Connect the appropriated communication port from the
PC to this device. After the physical connection is made, you are ready to configure this product. Make sure you have
connected the supplied RS-232C serial cable (DB9F to RJ-45 Plug) to the console port on the rear panel of this product.
Run the terminal emulation program such as Hyper Terminal with the following setting:
Emulation: VT-100 compatible
Band rate: 115200, Data bits: 8, Parity: None, Stop Bits: 1, Flow Control: None
5.1 Login Procedure
At the start up screen, you will see: