User manual

DynamixUM‐SNBUserManualVer1.0073
4.4.5. UM-SNB/3in1 / UM-SNB/3in1/4w E1+Serial+Ethernet interface model -- E1+Ethernet Interface mode
Interface
□E1 □Serial □Ethernet □E1+Serial
⊠E1+Ethernet
NTU
Type □STU-R □STU-C-INTCLK □STU-C-EXTCLK
Annex □A □B □F □G
PSD □SYM □ASYM
SNR Margin (-10~21)
SHDSL
Pair Mode □1 Pair □2 pair (For UM-SNB/3in1/4w only)
Channel □PCM31 □PCM31C □PCM30 □PCM30C □Unframed
Slot Number
First Slot
Code □HDB3 □AMI
AIS □Off □On
E1
Build Outs □75 Ohm □120 Ohm
□Nx64K □T1 mode
Date Rate
Auto Config □Disable □Enable
Duplex □Full □Half
Ethernet
Speed □100M □10M
When SHDSL.bis using 2-pairs(4-wires), the E1 time slot number and Ethernet Nx64K data rate number can only use even
number
When E1 framer is PCM31C and PCM30C and set pass through ON, no fractional function can be use.