User manual

DynamixUM‐SNBUserManualVer1.0044
3.5.4. Sub-menu tree for SETUP Ethernet Interface
SYSTEM SETUP Î SET UP ETHERNET
If you set Ethernet Auto Negotiation as Enable, the default setting on Duplex is Full and Speed is 100M.
If you set Ethernet Auto Negotiation as Enable, the Duplex and Speed cannot be set up and it will use auto configuration.
Ethernet Items Setting
T1 mode
Annex A/B 1 ~ 36
2-wires
Annex F/G 1 ~ 89
Annex A/B 2 ~ 72 (even number only)
Rate
Nx64K mode
4-wires
Annex F/G 2 ~ 178 (even number only)
Auto Disable Enable
Duplex
Full-Duplex
Half-Duplex
Auto
Configuration
Speed
100M
10M
Auto
Configuration
Note:
When SHDSL.bis using 2-pairs(4-wires), the Nx64(Rate) number can only use even number
When other side as T1 interface and unframed mode connect to this side as Ethernet interface, we must set Ethernet rate as
T1 mode.