User manual

DynamixUMSNBUserManualVer1.0018
2.3 Installation
Note: To avoid possible damage to this NTU, do not turn on the product before hardware installation.
(a) Plug the power cord in the power socket.
(b) Plug the console port in console if you want to configure the NTU with VT100 program of NB or PC.
(c) Plug the E1/T1 cable ( 75Ω BNC cables for E1 or 120Ω cable for E1 or T1)
or/and SERIAL cable
or/and Ethernet cable
(d) Plug SHDSL cable
(e) Power on