User manual

DynamixUM‐SNBUserManualVer1.00158
6.7 E1 Unbalanced Cable
Connections to the E1 BNC ports are made using a 75-ohm coaxial cable with a bayonet-style twist-lock BNC connector.
We do not provide the cable. It is widely available from other sources.
The front view of BNC sockets on rear panel:
The internal wiring between BNC sockets and RJ-48C:
Signal Name BNC Connecters RJ-48C Connector
Transmit Tip Center pin of Tx Connector 5
Transmit Ring Shield of Tx Connector 4
Receive Tip Center pin of Rx Connector 2
Receive Ring Shield of Rx Connector 1