User manual

DynamixUM‐SNBUserManualVer1.0011
Off Loopback is off.
On E1 line is connected.
SYN Green
Off E1 line is dropped.
Blink There are error seconds.
ERR Red
Off There is not any error second.
On Loopback is on.
E1
LPB Yellow
Off Loopback is off.
On Data transmit in V.35.
TD Green
Off No data transmit in V.35.
On Data receive in V.35.
RD Green
Off No data reveive in V.35.
Blink Error second occurs.
V.35
ERR Red
Off No error second.
On Data transmit in Ethernet.
LINK Green
Off No data transmit in Ethernet.
On Data receive in 100M.
100M Green
Off No data receive in 100M.
Blink Error collision occurs.
ETH
COL Red
Off No error collision.
Blink E1 Data tramsmit and receive
Green
On E1 cable cable connected
E1
Red On No E1 cable connected
Blink Serial Data tramsmit and receive
Green
On DTE Connected
SER
Red On DTE Disconnect
Blink Ethernet Data tramsmit and receive
Green
On Ethernet cable connected
MODE
ETH
Red On No Ethernet cable connected