User manual

DynamixUM‐SNBUserManualVer1.00114
For short distance of T1 cable, this device must decreases outgoing signal strength.
There are five type T1 LBO for your select : 0 ~133ft , 133 ~ 266ft , 266 ~399 ft , 399 ft ~ 533ft , 533ft ~ 655ft
Setup T1 Parameter, AIS
AIS (Alarm Indication Signal) is a method to inform the remote connection that there is a signal or sync problem with the T1.
5.4.7. Remote configuration
You can set the “Enable/Disable function” to let the remote side configure parameters to this device remotely.