User manual

DynamixUM‐SNBUserManualVer1.00102
STU-C will send AIS (Alarm Indication Signal) to DTE while AIS function is enabled.
z
Example 2: When SHDSL connection drops, STU-R and STU-C both send AIS (Alarm Indication Signal) to DTE in the
same time while AIS function is enabled.
Setup E1 Parameter, Build Out
The SHDSL.Bis NTU can support both unbalanced E1 at 75 ohms (BNC) and balanced E1 at 120 ohms (RJ-48C). The settings
for impedance are made here under the build out menu setting.