User manual

DynamixUM‐SNBUserManualVer1.00100
For example, use channel as PCM30 or PCM30C (with time slot number is 30 and first time slot is 1) as following show. When
Pass Through set Off, the DSL transfer data is not include the time slot of FAS and CAS. The information of FAS and CAS on
remote is made by method of re-creation.
Setup E1 Parameter, Line Code
The G.SHDSL .Bis NTU supports two different line code. HDB3 is the most popular and preferred line coding and is also the
default setting. AMI line coding is also selectable.
`