User manual

Dynamix UM-SE G.SHDSL.bis EFM Bridge Modem User Manual V003 52
you don’t set them, all users can be able to access the EFM modem using the default
Supervisor ID and Supervisor Password is “root”.
You can authorize five legal users to access the EFM modem via telnet or console only. There
are two UI modes, menu driven mode and command mode to configure the EFM modem.
The default user name on and Password are “admin”.
There are two UI modes, menu and command mode for telnet or console mode to setup the
EFM modem. The menu is meaning menu driven interface mode and Command is meaning
line command mode. We will not discuss command mode in this manual.
Telnet Console mode:
User name
Password
Supervisor Password
All function can use Can only use ping test, view the status and configuration
Exit
Web Brower mode:
Supervisor ID
Supervisor Password
All function can use
Logout
There have a Telnet Port number setting. The default value is 23.