User manual

G.shdsl Router User Manual 152
94
The
virtual
menu contains range of virtual IP address, delete virtual IP address and show virtual
IP address.
>> range Edit virtual IP address pool
delete Delete virtual IP address pool
list Show virtual IP address pool
You can create five virtual IP address pool range in
range
command.
----------------------------------------------------------------------
Command: setup ip_share nat virtual range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT local address range entry number <1~5>: 1
Base address: 192.168.0.2
Number of address: 49
----------------------------------------------------------------------
You can delete virtual IP address range- from 1 to 5- by using
delete
command.
You can view the virtual IP address range via
list
command.
To setup global IP address pool, move the cursor “
>>
” to
global
command and press enter.
>> range Edit global IP address pool
interface Bind address pool to specific interface
delete Delete global IP address pool
list Show global IP address pool
You can create five global IP address pool range via range command.
----------------------------------------------------------------------
Command: setup ip_share nat global range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT global IP address range entry number <1~5>: 1
Base address: 122.22.22.2
Number of address: 3
----------------------------------------------------------------------
After configuration global IP address range, You can bind address pool to specific interface via
bind command.
----------------------------------------------------------------------
Command: setup ip_share nat global interface <1~5> <1~8>
Message: Please input the following information.
NAT global ddress range entry number <1~5>:
1
Active interface number <1~8>: 1
----------------------------------------------------------------------