User guide

Fig.2

Change Default IP Network:

Step 3: After successfully logon to the system, we need to change the

network configuration. Click Device Setting > Network to setup the service

network interface (WAN) parameters. Enter the desired IP address ( IPv4 or

IPv6 ), Subnet mask and default gateway or select “DHCP” or “PPPOE”. Apply

the change by clicking Apply button as fig (Fig.3).

Note: If your WAN port is setting in the 10.x.x.x segment IP address, please

make sure that you also need to change the LAN port to other segment such as

192.168.x.x

(Fig.3)