User guide

Digit Manipulation>

The Digit Manipulation (DM) will be processed based on prefix and DM

group after the DNIS ( Called Party ) was determined.

 DM Group: Different DM group have different application as follows.

 FXO: This DM group is used for FXO port with 2 stages dialing.

After the DNIS (Called party messages) is collected, this DM

group will be processed before enter the routing procedure.

 FXS: This DM group is used for FXS dialing out.

 VOIP: This DM group is used for VOIP incoming call. After the

DNIS is collected in 2 stages dialing or 1 stage dialing, this DM

group will be processed before entering the routing

procedure.

 1-4: These DM groups are used for backup routing purpose.

When a backup routing is used, the administrator can select a

DM group to be processed before starting the backup routes.

 Matched Prefix: The prefix to be matched for DM. The longest prefix

will be matched first.

 Matched Length: Set to 0 to ignore the length. The other 1-32 are the

digit length to be matched as a condition.

 Start Pos: The start digit position to be replaced.

 Stop Pos: The stop digit position to be replaced.

 Replace Value: The value to be replaced.

Example of Digit Manipulation Settings:

Prefix

Len

Start

Pos

Stop

Pos

Replace

Value

Test DNIS

(called

number)

Result DNIS

(dial out called

number)

886 0 0 0 002 8862123456 0028862123456

886 12 0 0 002 8862123456 8862123456

886 0 2 5 002 8862123456 8800223456

886 0 30 30 002 8862123456 8862123456002

886 0 1 6 8862123456 83456