User guide

22
 PabxMode: Enable or Disable PABX mode, default is Enable.
NAT Setting
bridge mode. Here is the setting for NAT related service.
> DHCP Srv. (DHCP Server)
 DHCP Server: Enable DHCP server or not.
 Client Range(Start IP): specify DHCP client lease start IP
 Client Range(End IP): specify DHCP client lease end IP
 Default Gateway: specify the default gateway
 Submask : specify the subnet mask.
 DNS Server 1 : specify the DNS server 1 address
 DNS Server 2 : specify the DNS server 2 address
> UPNP (universal plug and play server)
DW 2522 can support NAT, 2 Ethernet ports (management mode) or