User guide

20
Select Http:
This feature is ready to use now.
 Http Configuration: Enable or Disable
 Http Config URL: internal used only
 Refresh interval(minute): interval to check whether have a new
configuration/firmware or not in minutes
 User ID: specify the Login ID for http authentication
 Password: specify the password for http authentication
>SNMP
SNMP Agent:
 SNMP Agent: Enable SNMP or not.
 Read Only Community Name: The community name to read through
SNMP protocol
 Read Write Community Name: The community name to read and
write through SNMP protocol.
 SNMP Agent Access on WAN: Enable SNMP to be accessed through
WAN port or not.
Trusted Peer:
 Type:
 Any Address: Any address can retrieve the SNMP information.