User guide

18
> Event Notice
1. Register Failure or re-registered
2. FXO RJ-11 cable was plugged or unplug
3. Ethernet reconnected
4. System started
 Syslog: Enable or disable to send system events to syslog server or not
 Syslog Port: syslog server service port (default is 514)
Auto Provision:
Please contact Welltech for availabilities.
>Provisioning
DW 2522 can send Syslog Event Notice when it has the following cases:
The Dynamix 2522 can be provisioned by HTTP Server for large deployment.