User guide

Step 8: After soft-reset or reboot, Click Line Status to check registration

status. (Fig.8)

(Fig.8)

following features:

For FXO: (2 stage dialing use)

1. For PSTN incoming call, the caller hears a dial tone when FXO port answer

uses the setup from SIP Trunk 1 to make SIP call out.

port and dial to PSTN Phone. (used by non-PABX Mode)

For FXS:

1. The user can pick up the handset and hear dial tone. Call out and talk.

2. For VOIP incoming call to a dedicated FXS number, this phone will ring and

can answer to talk.

Check DW 2522 Registration Status:

Through the above settings, the DW 2522 should be able to do the

call. Then the caller continues to dial a VOIP number and DW 2522

2. For VOIP incoming call from SIP Trunk, DW 2522 will off hook a FXO