Specifications

01.99 6 Programming

6-26 SINUMERIK 840C, OEM Version for Windows (BA)

Proceed as follows to load an individual file of a workpiece:

• Select the right-hand combo box with the EDIT key.

• Open the combo box with the RIGHT ARROW key and use the vertical

ARROW keys to position the selection bar on "NC Program Memory" or

"NC System Data".

• Press the INPUT key to enter the selected item in the right-hand combo

box.

• Select the left-hand combo box with the EDIT key.

• Open the combo box with the RIGHT ARROW key and use the vertical

ARROW keys to position the selection bar on the workpiece which

contains the desired file.

• Press the INPUT key to enter the selected item in the combo box.

Fig. 6-14 Loading individual files

• Select the list box immediately underneath using the EDIT key.

• Position the selection bar on the desired file. Note the direction of the copy

arrow.

• Press the COPY softkey.

The selected file is loaded into the NCK memory. If a file with the same name

already exists in the NCK memory, a safety prompt appears.

Loading individual files