User guide

Change Default Time setting:

Step 4: When re-logon to the new IP address, the next is to setup the system

time zone. Click Device Setting > Time to setup the system. Enter the

current SNTP server, time zone and daylight saving parameters. Apply the

change by clicking Apply button. (See figure 1-6-4 Time setting)

Figure 1-6-4 Time setting

Modify SIP Account Parameter:

trunk and new to create the required sip trunk. Enter the trunk ID to 1 and

input those SIP parameters. Apply the change by clicking Apply button. (See

Figure 1-6-5 SIP Tru nk).

Note: please don’t delete sip trunk, even it is unless at all, because it have to

be used with Route plan.

Figure 1-6-5 SIP Trunk

FXS ports are using the same SIP proxy setting. If you need use different SIP

proxy server, please use SIP trunk instead. Click FXS Settings > SIP Proxy to

it is necessary for VOIP calling while Dynamix 2504 is optional. Click SIP

Step 5: The next step is to add a SIP trunk for VOIP calling. For Dynamix 2540,

Modify FXS SIP Settings: (

Dynamix 2504 only)

Step 6: Set the SIP proxy server for FXS calling. For Dynamix 2504, the all