User guide

72
User ID : 1003
User password: 1003
Display Name: 1003
Enter SIP Trunk #4 information as follows.
TEL No : 1004
User ID : 1004
User password: 1004
Display Name: 1004
3. Select “2 Stage Dialing” at “DNIS is Register TEL” webpage. When user
Dial Tone from PABX extension 201 which was connected to FXO Line #1.
And it works like this analog phone was connected at remote PABX’s
extension 201. See Figure 11.
If set “1 stage dialing” in here, FXO will dial out line number 1001 to PABX
2504.
Figure 11.
picks up the handset from FXS port #1 of Dynamix 2504, you should hear
automatically when user picks up the handset from FXS port #1 of Dynamix