User guide

70
following picture. See Figure 8. For example: Set static IP address
192.168.23.23 on Device Setting
Figure 8.
Step 2: Go to VOIP Setting

SIP to select the “Accept Proxy Only”
feature to NO and make sure to setup the SIP Local Port number to 8080.
See Figure 9.
Figure 9.
Step 3: Set the FXO SIP line’s information to each line.
each line by selecting Line ID from 1 to 4. See Figure 10. Enable Hotline
feature by selecting Incoming Call Handling to Hot Line and give remote
FXO SIP port 1 number 1001 hotline to remote FXS port 1 number 501
directly.
Dynamix 2540 (FXO Gateway) configuration
Step 1: set static IP address to Dynamix 2540 FXO gateway’s WAN port as

Network of Dynamix 2540 WEB page.
Go to FXO Setting webpage of
Dynamix 2540 FXO Gateway and configure
Dynamix 2504 FXS gateway port 1 number to 501. For example: