User guide

IP address : 192.168.23.23

SIP Line number : 1001, 1002, 1003 and 1004

FXO Telephone Number : default is Blank

PABX Extension number 201, 202, 203 and 204 which were connected to Port

#1 to #4 at FXO Gateway.

For example: Set static IP address of 192.168.18.201 at WAN port on Device

Figure 2.

Step 2: Go to VOIP Setting



SIP to select the “Accept Proxy Only”

feature to NO and make sure to setup the SIP Local Port number. In this

example, the SIP local port is 8080. See Figure 3. This port number should be

the same as Phone book configuration SIP port number.

Figure 3.

Step 3: Set the FXS line’s information to each port ( Line ID is the FXS’s port

number at Figure 4).

Enable Hotline feature at FXS gateway to port #1 and enter HOT LINE TEL

Dynamix 2504 (FXS Gateway) configuration

Dynamix 2540 (FXO-04 Gateway ) information :

Step 1: Configure static IP address to

Dynamix 2504, like below Figure 2.

Setting Network of

Dynamix 2504 WEB page.