User guide

46
billing signal or not. When a FXS calls to VOIP and answered by the
as a billing stop signal
.
 Current Drop generation: Enable current drop (0 voltage) when
VOIP is disconnected or not.
 Input(Encode)Gain: Adjust the volume from FXS to VOIP (default is
0 db)
 Output(Decode)Gain: Adjust the volume from VOIP to FXS (default
is 0 db)
 FAX Relay: Enable T.38 Fax Relay or not
 Voice mail subscription: enable voice mail subscription (MWI) or
not.
 Caller ID mode:
 Inhibit: don’t send caller ID to analog phone.
 Transparent: send caller ID to analog phone.
 SIP caller ID mode:
 Inhibit: don’t send caller ID to VOIP SIP
 Transparent: send caller ID to VOIP SIP
 Register Type:
 Register: register to proxy. If it is not registered to SIP proxy,
the FXS line still can use SIP trunk for VOIP call.
send register message out.
send register message out, the FXS line still can use SIP trunk
for VOIP call or call locally.
 TEL No: The registrar telephone number
 User ID: The SIP user ID for register and call making
 User Password: The SIP password for register and call making
 Display Name: The SIP display name
V O I P, Dynamix 2504 will generate reverse signal to FXS as a billing
start. When VOIP side disconnect first, Dynamix 2504 will reverse back
 Predefine: When it is set to predefine, Dynamix 2504 will not
 Internal: When it is set to internal, Dynamix 2504 does not