User guide

29
3-8 Port Filter
Figure 3-8 Port Filter
 Port Filter: enable port Filter or not.
 Port Range: Starting and stopping port to be forward. If you are
using only 1 port, please set the starting equal to stopping port.
 Protocol: TCP, UDP or both are used for port blocked.
3-9 Port Fwd
Figure 3-9 Port Fwd
 Port Fwd: enable port forward feature or not
 Port Range: Starting and stopping port to be forward. If you are
using only 1 port, please set the starting equal to stopping port.
 Protocol: TCP, UDP or both are used for port forward
 Local IP address: The LAN side IP address to be forwarded
 Local Port: The LAN side port to be forwarded. If you are using the
port range, this port indicates the starting port.
The Dynamix 2504 support port forward feature as below