User guide

11
Step 9: After soft-reset or reboot.
>Click Status > SIP Trunk Status to check whether registered or not. (See
Figure 1-6-9 SIP Trunk States )
Figure 1-6-9 SIP Trunk States
>Click line status to check whether registered or not. (Figure 1-6-10 SIP
Trunk States)
Figure 1-6-10 SIP Trunk States
following:
1. The user can pick up the handset and hear dial tone. Call out and talk.
2. For VOIP incoming call to a dedicate FXS number, the dialed phone will ring
and can answer to talk.
Through the above settings, the Dynamix 2504 should able to do the
For FXS-04: