User guide

Dynamix DW-E
75
Parameters:
• Group ID: Select the T1/E1 according to the selection of Hunting Group
ID when dialed number is matched
• Number To Route: The dialed telephone number to be matched
• Matched ANI Prefix: Calling party number used to filter
• Allow Use Others: To select other T1/E1 trunk when all trunk are busy at
your desired Hunting Group.
o Allowed: The call will use other T1/E1 trunks which is not belong to
the selected hunting group
o Forbad: The call will be disconnected immediately
Radius Setting
When you have an external RADIUS server to do the AAA
(Authorization, Authentication and Accounting), enter the correct parameter to
the Radius setting. It must be used in call flow to take effect.
Start Path: Configuration>Radius Setting
Parameters:
• Auth IP: Radius Authentication Server IP address (default)
• Auth Port: Radius Authentication Server Port
• Acct IP: Radius Account Server IP address
• Acct Port: Radius Account Server Port
• Backup Auth IP: Backup Radius Authentication Server IP address
• Backup Auth Port: Back Radius Authentication Server Port
• Backup Acct IP: Back Radius Account Server IP address
• Backup Acct Port: Back Radius Account Server Port
• Secret Key: The shared secret key with RADIUS Server
• Max Retry: The maximum retry times
• Response Timer (sec): The maximum wait for response time from
RADIUS Server
• Auth Retry Interval (sec): The internal to resend the Authentication
packet to RADIUS Server.
• Acct Retry Interval (sec): The internal to resend the Account packet to
RADIUS Server.