User guide

Dynamix DW-E
74
Parameters:
• Group ID: Hunting Group ID
• Description: Description of Hunting Group
• Hunting Method: Route selection
o Random: Random select a trunk within this hunting group
o Priority: Select a trunk by priority. (Priority 1 has lowest priority; 9
has highest priority)
o Round Robin: Call is hunting rotationally
Start Path: Configuration>Routing Plan>Hunting Group>Detail
Parameters: Group: 1
Description: 0932
• Interface ID: Interface ID
• Trunk ID: trunk id for group 1
• Priority: Trunk priority
• Channel Mask: Channel mask for incoming or outgoing calls (refer
T1/E1 Trunk Configuration)
☺ Note: When a Route Plan channels mask is cooperated to trunk
channel mask to decide the channel availity 17~31 channels are
available: Example 1:
Trunk ID: 0 channel mask: 0xffffffff Route Plan
channel mask: 0x0000ffff Available channel:
0x0000ffff (17~31) channels.
Example 2:
Trunk ID: 0 channel mask: 0xffff0000
Route Plan channel mask: 0xffc00000 Available
channel: 0xffc00000 (1~9) channels.
Call Routing
The call routing can be used for hunting a PSTN trunk by prefix.
Start Path: Configuration>Routing Plan>Call Routing