User guide

Dynamix DW-E
72
DNIS ACL
Start Path: Configuration>Access Control>DNIS ACL
Parameters:
• DNIS: Called party number used for filter
• Access Mode:
o Allow: The called numbers are allowed for calls
o Disallow: The called numbers are disallowed for calls
☻Note: If in the system has both allowance and disallowance setup, the
system will check allowance first and disallowance later. If only
disallowance inputted all DNIS will allow to work except
disallowed DNIS. If only allowance inputted, only those DNIS
from allowance list will work.
Number Replace
The purpose of “Number Replace” is to replace called number or
calling number for PSTN or IP. It must be used in call flow to take effect.
Step 1: It is useful for real PSTN number to virtual VoIP number replacement.
Click Number Replace to add a new Number Replace Group, add as
figure 7.8-1.
Field Description:
• Group ID: 1 (Number Replace Group identify)
• Description: Description
Step 2: Click the New created NR and Detail button to add digits setting as
figure 7.8-2.