Manualshelf

User guide

ManualsBrandsDynamix ManualsComputer equipmentDW 4 FXO
61626364656667686970
Dynamix DW-E
63
o Yes: Register to GK
o No: Not register to GK
• Gatekeeper IP: Gatekeeper IP Address
• Gatekeeper RAS: UDP Port number listened on Gatekeeper (default:
1719)
• E.164 Tel: Telephone number to be registered to Gatekeeper
• Register H.323 ID: H.323 alias name to be registered to Gatekeeper
• Register Time To Live (sec): The registration maximum time to live
setting when registered to the Gatekeeper
• Response Timeout (Q.931)(sec): The maximum time to wait for
response from sending call setup signal out
• Connect Timeout (Q.931)(sec): The maximum time to wait for
connection (answer) from dialing out the destination number
• DTMF Relay: DTMF transfer type selection
o RTP relay (RFC 2833): DTMF relay via RTP packet (RFC2833
standard)
o DTMF transparent: transmitter DTMF over voice channel
o H.245 Signal input: DTMF relay via H.245 user signal input
o H.245 Alphanumeric: DTMF relay via H.245 Alphanumeric signal
o Q.931 User Information: DTMF relay via Q.931 User to user
information
• Fax Transport: Fax transport type selection
o Transparent mode: Transparent mode (by voice packet)
o T.38 Fax Relay (H.245 mode): T.38 Fax relay (H.323 Annex D)
o T.38 Fax Relay (Propriety mode): T.38 Fax Relay (propriety mode)
o FRF11 Fax Relay (Propriety mode): FRF11 Fax Relay (propriety
mode)
• Fast Connect Mode: Connection of H.323 call fast mode
o Disable: Don’t use Fast Start.
o Enable Fast Start Both Site: Use Fast Start for incoming call and
outgoing H.323 calls
o Fast Start-H.323 incoming only: Enable Fast Start for H.323
incoming calls only
o Fast Start-H.323 outgoing only: Enable Fast Start for H.323
outgoing calls only.
o Early H.245: Use Early H.245
• H.245 Tunneling: Transfer the H.245 message over the Q.931 channel
• FS Enable 1-6 (Codec Priority 1-6): Enable Fast Start codec selection
for each codec
• Inbound DM Group: Digit Manipulation Group for H.323 incoming calls
• Outbound DM Group: Digit Manipulation Group for H.323 outgoing
calls
Advance H.323 Configuration:
Start Path: Configuration>H.323 >Advance