User guide

Dynamix DW-E
59
Advance Trunk Configuration:
Start Path: Configuration>Interface>Trunk>Advance
Advance Parameter Description:
• Interface ID: System parameter
• Trunk ID: System parameter
• Src Num Plan: ISDN source number plan
• Dest Num Plan: ISDN destination number plan
• Src Num Type: ISDN source number type
• Dest Num Type: ISDN destination number type
• Src Num Presen: ISDN source number presentation
• Src Num Screen: ISDN source number display
• Input Gain: Voice Gain from PSTN to IP side (default: 0 db)
• Output Gain: Voice Gain from IP to PSTN side (default: 0 db)
• Q.931 General Opt.: used for Q.931 general behavior.
o 0x00000001: No sending of STATUS message on receipt of an
unknown IE. If this bit is set, then ISDN Stack does not generate a
STATUS message after having received a message containing 1 or
more unknown/unrecognized IE(s). This bit applies only for network
variants for which the sending of STATUS in this case is optional
(where recommendation says “ a SATUS MAY be returned”)
o 0x00000002: No sending of STATUS message on receipt of an
optional IE with invalid content. If this bit is set, then ISDN Stack
does not generate a STATUS message after having received a
message containing 1 or more optional IE(s) with invalid content.
This bit applies only for network variants for which the sending of
STATUS in this case is optional (where recommendation says “a
STATUS MAY be returned”).