User guide

Dynamix DW-E
57
Basic Parameter Description:
• Interface ID: System parameter
• Trunk ID: System parameter
• Trunk Type: T1or E1 selection
• Description: Description for this trunk ID
• Termin Side: Network site or User Site (normally, you set to “user site”
when connect to switch)
o User Side
o Network Side
• Trunk Mode: Trunk operation mode
o Disable: Disable the trunk
o Normal: Accept PSTN and VoIP calls
o PSTN incoming only: Allow the PSTN incoming calls only
o VOIP incoming only: Allow the VOIP incoming calls only
• Hunting Method: PSTN trunk hunting method for available channel
o Random: Hunt randomly
o Cyclic: Initial hunt (after power-up/reboot) begins with B channel 1;
subsequent hunts begin with position following last successfully
allocated resource
o Rotary: Hunt always begins with B channel 1
o Reverser Rotary: Hunt always begins with B channel 31
o Reverser Cyclic: Initial hunt (after power-up/reboot) begins with B
channel 31, follows next available channel in reverser order
• CAS Variance: CAS counting variance
• Framing Method:
o For T1
- Super frame
- 4-frame multi-frame
- 12 frame multi-frame (D4)
- extend super frame without CRC6